SPR-161 Technical Specifications:
An automated analyser is a medical laboratory instrument designed to measure different chemicals and other characteristics in a number of biological samples quickly, with minimal human assistance.These measured properties of blood and other fluids may be useful in the diagnosis of disease.
Chemistry analyzers can be benchtop devices or placed on a cart; other systems require floor space. They are used to determine the concentration of certain metabolites, electrolytes, proteins, and/or drugs in samples of serum, plasma, urine, cerebrospinal fluid, and/or other body fluids.
Automated coagulation machines measure the ability of blood to clot by performing any of several types of tests including Partial thromboplastin times, Prothrombin times , Coagulometers require blood samples that have been drawn in tubes containing sodium citrate as an anticoagulant.
Microplate readers are instruments which are used to detect biological, chemical or physical events of samples in microtiter.
Urine Analyzers. A urine analyser is a device used in the clinical setting to perform automatic urine testing. The units can detect and quantify a number of analytes including bilirubin, protein, glucose and red blood cells.
Erythrocyte Sedimentation Rate (ESR) is the rate at which red blood cells sediment in a period of one hour. It is a common hematology test, and is a non-specific measure of inflammation. Since the introduction of automated analyzers into the clinical laboratory, the ESR test has been automatically performed.
A centrifuge is a laboratory device that is used for the separation of fluids, gas or liquid, based on density. Separation is achieved by spinning a vessel containing material at high speed; the centrifugal force pushes heavier materials to the outside of the vessel
Containment Barrier Isolator (CBI) facilitates the isolation of a product or process while providing the required conditions for a sterile/aseptic environment. It is configured to operate at positive or negative pressure. This equipment provides a comprehensive range of personnel and product protection in addition to protection for the surrounding work areas and the environment.
CBI’s design has complete compliance to PIC/s and EU cGMP standards with its 19 mm radius coved internal corners in a single piece chamber (no perforations or grilles for contaminants to be trapped on all 4 corners). Its Rear Return Filter ensures that ducts are not contaminated. The system comes in either recirculatory or single pass airflow
Fume hoods draw in air across a workspace to remove hazardous fumes and fine particles, while laminar flow cabinets blow air through a filter and out to prevent contamination of samples by dust or biological materials. This flow in turn draws out fumes and particles out of the exhaust and away from the laboratory.
There are three kinds of safety cabinets, Classes I, II, and III. Class II and Class III biological safety cabinets provide personnel, environmental as well as product protection. Whereas Class I safety cabinet, which is the most basic one, provides personnel and environmental protection only.
This series of centrifuges can be widely applied for tests featured by a small quantity of samples, a big number of procedures, large centrifuge force, and low requirements on temperature, including those performed by labs in such fields as biochemistry, genetic engineering, forestry, food and health as well as hospitals and other scientific research organizations.
Microhematocrit centrifuges are used for determination of volume fractions of erythrocytes (red blood cells) in blood and for separation of micro volumes of blood and solutions. It provides hematocrit values (HCT) for testing in biochemistry, immunity, genetics, blood separation and for general clinical tests.
Specifications
Features:
Being of the compact design, no noise and easy for operation, the product has two functions of continuous and touch, which is suitable for blending of the blood routine (anticoagulation tube, 820 sample cup and 900 sample cup etc.) with character of full mixing and no damage to the blood cells. Comparing to the manual operation, it is more convenient and also can be used for liquid mixing in other containers.
The economical vortex mixer is in a wide range of operation, there are two kinds of working plate: rubber and plastic. It can be used for liquids mixing in different test tubes, flasks, beakers. Dual mode switch makes the vortex work continuously or in touch. The speed of both models could be adjusted according to different requirements. Highefficiency and low noise.
The product is used for mixing of RPR testing card with character of stability, no noise, reasonable rotation speed and compact design. It is applicable to the epidemic prevention station, blood station dermatitis and hospitals.
working size:384*248mm
Timing:0-15min
Incubators are used in modern research laboratories to maintain a stable environment for processes such as growing cells and microbiological cultures and incubating antibodies and cells for fluorescence microscopy
This model has recently undergone a style improvement, giving the instruments a very modern appearance. They are high power microscopes with a robust high quality design and finished to an excellent standard. It is an ideal instrument in biological, histological, pathological field and can be widely used in academic demonstration and research.
The newly released Olympus CX23 microscope replaces the CX22 model. This Olympus CX23 model is easy to use, and offers outstanding optical performance with a large 20mm field of view. The LED light source provides stable long-term illumination. This microscope is ideal for education or laboratories.
2℃~8℃ Pharmacy / Medical & Lab Refrigerator YC- L Series is premium and high-quality refrigerator for medical and laboratory grade, which is perfect for storing sensitive materials in pharmacies, medical offices, clinics, laboratories, scientific institutions and more. This medical refrigerator has updated in quality and durability, and it can meet the stringent guidelines demands for medical and laboratory. YC-L series medical fridge is designed with 5 PVC-coated steel wire shelves with tag card for easy storage and clean. And it is equipped with high-efficiency air-cooling condenser and a finned evaporator for fast refrigeration. The digital display control panel ensure the temperature display accurately in 0.1℃.
